Cisco Meraki SD-WAN: Advanced Policy, Security and Programmability
This course is hands-on training on Cisco Meraki SD-WAN implementations, basic and advanced Cisco Meraki SD-WAN Security features that are available on Meraki MX routers. Deep dive into capabilities like Firewall and Traffic, Application Aware Firewall, AMP Integration, Content Filtering, Threat Protection, and many other advanced features are covered as a part of this training. This course also provides hands-on training on Cisco Meraki SD-WAN Programmability features. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco Multilayer Director Switch (MDS) Administration
Explore this Global Knowledge course and ask the Bolt team for the detailed syllabus.
Cisco NCS 2000 Deploying 96-Channel Flex Spectrum
The Cisco NCS2000 Deploying 96-Channel Flex Spectrum (OPT201) v3.0 course shows you how to plan, configure, and control optical networks using the Cisco® Network Convergence System (NCS) 2000 series Flex Spectrum platform. The course teaches you how to design Flex Spectrum networks with multi-degree Reconfigurable Optical Add-Drop Multiplexer (ROADM) multi-shelf nodes using the Cisco Transport Planner (CTP) software. You’ll learn how to: - Install the Cisco NCS 2000 series hardware - Configure an optical network and circuits using the Cisco Transport Controller (CTC) software - Learn which components and configurations take advantage of and/or are required for the Flex Spectrum 96-channel feature - Configure optical networks with multidegree ROADM multishelf nodes - Configure optical networks with colorless, contentionless, omnidirectional, and MPO cross-connect advanced features - Describe and configure the NCS 2000 400-Gbps Xponder line card Updated November 2026 Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco Nexus Dashboard Advanced
The Data Center Nexus Dashboard Advanced (DCNDA) training focuses on how to deploy and use Cisco Nexus Dashboard Insights (NDI) and Cisco Nexus Dashboard Orchestrator (NDO) to successfully monitor data center networks, and to provision a Cisco Application Centric Infrastructure (ACI)-based multisite network. The training is three days long and includes several activities that are either lab simulations or live labs. Activities that pertain to Nexus Dashboard Insights are implemented with lab simulations based on a real-world lab environment, while the lab activity related to Nexus Dashboard Orchestrator uses live software. This course is worth 24 Continuing Education (CE) credits.
Cisco NSO Administration and DevOps
The Cisco Network Services Orchestrator (NSO) Administration and DevOps course continues the learning journey of the NSO Essentials for Programmers and Network Architects and NSO Advanced for Python Programmers trainings by introducing you to the system administration and DevOps focusing on NSO. This includes the robust bridge linking network automation and orchestration tools, examining the development, operation, and administration task functions. You will learn how to set up, configure, deploy, and maintain a Cisco NSO solution, and learn best practices for using DevOps. The examples shown in this training demonstrate real-world scenarios to prepare you for deployment and management of new or existing NSO instances. The training guides you through the setup of production-ready NSO instances using system installation with access control settings, the deployment of NSO in Docker containers, and introduces modern DevOps concepts and tools such as Git and Continuous Delivery/Continuous Deployment (CI/CD). You will learn how to migrate Continuous Diagnostics and Mitigation (CDM) devices, how to build Network Configuration Protocol (NETCONF) Network Element Drivers (NEDs) from the NSO Command-Line Interface (CLI), how to handle NSO Alarms, and many more features that benefit you in your journey with Cisco NSO. This course is worth 32 Continuing Education (CE) Credits Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco Optical Technology Intermediate
The Cisco Optical Technology Intermediate (OPT200) v3.0 course is designed to teach you the skills necessary to deploy the Cisco® Optical Networking System (ONS), 15454 Multiservice Transport Platform (MSTP), and Cisco Network Convergence System (NCS) 2000 Series Dense Wavelength-Division Multiplexing (DWDM) networks from installation to protection. Through a combination of lecture and hands-on experience, you will learn installation, configuration, circuit protection, maintenance, and basic troubleshooting using the Cisco Transport Controller for the Cisco ONS 15454 M6 and M12 shelves, and for the Cisco NCS 2016 shelf. Additionally, in this course you will review DWDM terminology and components, explore available chassis and cards, and discuss hardware installation. You will learn to use the Cisco Transport Controller server software to connect to the nodes, perform network turn-up and circuit creation, and deploy linear and single-module ROADM (SMR) DWDM multishelf topologies. Using this software, you will also configure Raman amplifiers and Any Rate cards, and configure protected and unprotected circuits. The course covers a variety of card options: controllers, transponders, multiplexer-demultiplexer, add/drop, Raman amplifiers, and Cisco Any Rate muxponder cards. You will use the various cards to configure terminal, amplifier, mesh, split, Optical Service Channel (OSC) regenerator, and Reconfigurable Optical Add/Drop Multiplexing (ROADM) nodes. Finally, you will learn how to use many of the tools and features available with the Cisco Transport Controller to perform maintenance, testing, and basic troubleshooting of your optical network. This course will help you: - Deploy, maintain, test, and troubleshoot your optical network - Explain Cisco DWDM platform basics, DWDM network topologies, and the Cisco DWDM network management software - Expand and deepen your knowledge of optical networks and their maintenance - Identify the uses of the Cisco Transport Controller - Describe and utilize various optical network technologies Updated November 2026 Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco SD-WAN Advanced Monitoring and Troubleshooting
SDWADV is a 4-day Cisco SD-WAN training targeted to engineers and technical personnel involved in deploying, implementing, operating and optimizing Cisco SD-WAN solution, both in enterprise and Service Provider environments, including advanced features for centralized AAR/Data policies, QoS, application performance routing, configuration templates, control policies and troubleshooting common and advanced operating issues. The Cisco SD-WAN course is lab-intensive, and objectives are accomplished mainly through hands on learning and scripting. Students taking this Cisco SD-WAN training course should be familiar with Wide Area Networks (WANs) in a variety of ways. Ideal candidates for this course include engineering and planning teams who evaluate WAN evolution and personnel involved in SD-WAN Design, Implementation and Operation. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco SD-WAN Operations Troubleshooting and Best Practices
SDWOTS is a 5-day course covering the deployment options, operations and features of Cisco Software-Defined WAN (SD-WAN). SD-WAN is an overlay architecture that overcomes the biggest drawbacks of traditional WAN. Students will learn how to design, configure and operate a Cisco SD-WAN utilizing any transport (MPLS, Broadband, LTE, VSAT etc.). Candidates will discuss and build an SD-WAN environment starting from Day 0 provisioning and will also be able to provide troubleshooting, management, policy control and application visibility across the enterprise network. This hands-on Course covers the Cisco SD-WAN product and contains extensive labs to reinforce the knowledge learned. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco Secure Access Administering and Troubleshooting
This course delivers a comprehensive framework for understanding, deploying, managing, and troubleshooting Cisco Secure Access in modern hybrid environments. Students begin with an introduction to cloud security principles and foundational models such as Secure Access Service Edge (SASE) and Zero Trust Access, before progressing into detailed coverage of Cisco Secure Access architecture, core features, licensing options, and integrations with Cisco SD-WAN, Secure Firewall, and Meraki. Building on that foundation, learners will work through the full Secure Access lifecycle - from initial onboarding and configuration to user and identity management, DNS forwarder set up, network connectivity, and the creation of internet and private access policies. The course places strong emphasis on endpoint security, VPN services, data loss prevention (DLP), malware protection, and the deployment and use of Cisco Secure Client across multiple platforms and operating systems. Advanced topics include monitoring and logging, troubleshooting methodologies, scalability planning, and leveraging ThousandEyes for digital experience monitoring and network performance insights. Students will also explore Cisco Secure Access APIs to support automation, integration, and operational efficiency within their environments. Upon completion, students can design, deploy, integrate, secure, and automate Cisco Secure Access in enterprise SASE environments. Updated 06/07/2026 Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco Secure SD-WAN Integration and Design
SDWSEC is a 3-day Cisco SD-WAN training targeted to engineers and technical personnel involved in designing, deploying, operating, and securing SD-WAN solutions both in enterprise and Service Provider environments. This training is specifically designed for partners and customers implementing secure Cisco SD-WAN integrated with the complete feature set of Cisco Umbrella including DNS Security, Cloud Based Firewall and Secure Internet Gateway. The course walks you through how each integration works and how to design and implement it step-by-step. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Cisco Secure Workload Firewall Enforcement Agents, Data Flow Mapping, and Advanced Policy Deployment
Cisco Secure Workload Firewall Enforcement Agents, Data Flow Mapping, and Advanced Policy Deployment, CSWADV, is a 5-day course exploring telemetry data, the flows corpus, and how Cisco Secure Workload Firewall Agent provides enforcement. This course
Cisco Security Fundamentals
Stay ahead of evolving threats with Cisco Security Fundamentals (SECFNDU), a course crafted for IT professionals who want actionable skills in modern network security. Delve into the latest technologies, including virtualization, next-generation firewalls, VPNs, and endpoint protection. You’ll master the deployment and management of Cisco Secure Firewall ASA and Umbrella, learning how to implement robust security policies and respond to real-world attack scenarios. SECFNDU goes beyond theory, offering practical insights into attack vectors, reconnaissance techniques, and infrastructure protection. By the end of the course, you’ll be ready to secure networks, endpoints, and cloud environments with confidence—making you an indispensable asset to any organization. This course is worth 24 Continuing Education (CE) Credits Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.