In this 5-day Advanced SD-WAN Course, Students will learn Advanced Techniques to Deploy Advanced Features of SDWAN. This course focuses on High Availability, Advanced Settings, Templates and Configuration Groups, APP-QOE with FEC, TCP OPT DRE, SD-AVC, Per-Tunnel/Adaptive/VPN QoS, Security using SASE/ Cloud/On-Prem, Students will then focus on Routing, including OMP, Service Chaining, BGP, EIGRP, OSPF, On-Demand Routing, DIA Routing through Branches/Hubs/Data Centers. Learn to deploy advanced features of both Local and Centralized Policies is included along with this skills required to troubleshoot. This course is worth 50 Continuing Education (CE) Credits Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
This five-day course is designed to provide students with the tools required for implementing, monitoring, and troubleshooting Layer 3 components in an enterprise network. Detailed coverage of OSPF, BGP, multicast, class of service (CoS), and EVPN-VXLAN is covered in depth. The course also exposes students to common troubleshooting commands and tools used to troubleshoot various intermediate to advanced issues. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations. This course uses Juniper Networks vSRX virtual firewall for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. This course is based on Junos OS Release 19.3R1.8.
This two-day course is designed to provide detailed coverage of virtual LAN (VLAN) operations, Multiple Spanning Tree Protocol (MSTP) and VLAN Spanning Tree Protocol (VSTP), authentication and access control for Layer 2 networks, IP telephony features, class of service (CoS) and monitoring and troubleshooting tools and features supported on the EX Series Ethernet Switches. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos operating system and in monitoring device and protocol operations. This course uses Juniper Networks EX 4300 Series Ethernet Switches for the hands-on component, but the lab environment does not preclude the course from being applicable to other Juniper hardware platforms running the Junos OS. Optional lab components are available allowing attendees to perform network management and troubleshooting tasks using Junos Space Network Director 3.0. This course is based on Junos OS Release 17.1R1.8. Advanced Junos Enterprise Switching (AJEX) is an advanced-level course. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
The Cisco Aggregation Services Router 9000 Series Essentials course introduces you to the features and functions of the Cisco Aggregation Services Router (ASR) 9000 Series platforms. Through a combination of lecture and hands-on labs, you will gain an understanding of all major aspects of the platform, including hardware, Layer 2 and Layer 3 services, routing protocols including Segment Routing, Layer 2 and Layer 3 multicast, Quality of Service (QoS) features, and network virtualization. The course investigates Cisco Internetworking Operating System (IOS) XR 64-Bit Linux-based feature parity in the environment, as well as how to install Cisco IOS® XR 64-Bit software packages. This course is worth 32 Continuing Education (CE) Credits.
Company EventElearning (Self-paced)Virtual Learning
Understand foundational concepts, business drivers, and an architectural vision of Cisco Catalyst SD-WAN. The Cisco Catalyst SD-WAN Operation and Deployment (SDWFND) training provides foundational concepts, business drivers, and an architectural vision of Cisco Catalyst software-defined wide area network (SD-WAN), demonstrating how its core principles enable agile, secure, and cloud-ready WAN solutions to meet modern business demands. This training also earns you 14 Continuing Education (CE) credits toward recertification. Virtual and Classroom learning - V&C Select™ V&C Select™ is a simple concept and a flexible approach to delivery. You can 'select' a course from our public schedule and attend in person or as a virtual delegate. Virtual delegates do not travel to this course, we will send you all the information you need before the start of the course and you can test the logins.
The Cisco NCS2000 Deploying 96-Channel Flex Spectrum (OPT201) v3.0 course shows you how to plan, configure, and control optical networks using the Cisco® Network Convergence System (NCS) 2000 series Flex Spectrum platform. The course teaches you how to design Flex Spectrum networks with multi-degree Reconfigurable Optical Add-Drop Multiplexer (ROADM) multi-shelf nodes using the Cisco Transport Planner (CTP) software. You’ll learn how to: - Install the Cisco NCS 2000 series hardware - Configure an optical network and circuits using the Cisco Transport Controller (CTC) software - Learn which components and configurations take advantage of and/or are required for the Flex Spectrum 96-channel feature - Configure optical networks with multidegree ROADM multishelf nodes - Configure optical networks with colorless, contentionless, omnidirectional, and MPO cross-connect advanced features - Describe and configure the NCS 2000 400-Gbps Xponder line card Updated November 2026 Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
The Cisco Optical Technology Intermediate (OPT200) v3.0 course is designed to teach you the skills necessary to deploy the Cisco® Optical Networking System (ONS), 15454 Multiservice Transport Platform (MSTP), and Cisco Network Convergence System (NCS) 2000 Series Dense Wavelength-Division Multiplexing (DWDM) networks from installation to protection. Through a combination of lecture and hands-on experience, you will learn installation, configuration, circuit protection, maintenance, and basic troubleshooting using the Cisco Transport Controller for the Cisco ONS 15454 M6 and M12 shelves, and for the Cisco NCS 2016 shelf. Additionally, in this course you will review DWDM terminology and components, explore available chassis and cards, and discuss hardware installation. You will learn to use the Cisco Transport Controller server software to connect to the nodes, perform network turn-up and circuit creation, and deploy linear and single-module ROADM (SMR) DWDM multishelf topologies. Using this software, you will also configure Raman amplifiers and Any Rate cards, and configure protected and unprotected circuits. The course covers a variety of card options: controllers, transponders, multiplexer-demultiplexer, add/drop, Raman amplifiers, and Cisco Any Rate muxponder cards. You will use the various cards to configure terminal, amplifier, mesh, split, Optical Service Channel (OSC) regenerator, and Reconfigurable Optical Add/Drop Multiplexing (ROADM) nodes. Finally, you will learn how to use many of the tools and features available with the Cisco Transport Controller to perform maintenance, testing, and basic troubleshooting of your optical network. This course will help you: - Deploy, maintain, test, and troubleshoot your optical network - Explain Cisco DWDM platform basics, DWDM network topologies, and the Cisco DWDM network management software - Expand and deepen your knowledge of optical networks and their maintenance - Identify the uses of the Cisco Transport Controller - Describe and utilize various optical network technologies Updated November 2026 Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.
Company EventElearning (Self-paced)Virtual Learning
SDWOTS is a 5-day course covering the deployment options, operations and features of Cisco Software-Defined WAN (SD-WAN). SD-WAN is an overlay architecture that overcomes the biggest drawbacks of traditional WAN. Students will learn how to design, configure and operate a Cisco SD-WAN utilizing any transport (MPLS, Broadband, LTE, VSAT etc.). Candidates will discuss and build an SD-WAN environment starting from Day 0 provisioning and will also be able to provide troubleshooting, management, policy control and application visibility across the enterprise network. This hands-on Course covers the Cisco SD-WAN product and contains extensive labs to reinforce the knowledge learned. Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.