Prices shown in US dollars.
Find my training Basket 0
Cisco

Cisco NCS 2000 Deploying 96-Channel Flex Spectrum

The Cisco NCS2000 Deploying 96-Channel Flex Spectrum (OPT201) v3.0 course shows you how to plan, configure, and control optical networks using the Cisco® Network Convergence System (NCS) 2000 series Flex Spectrum platform. The course teaches you how to design Flex Spectrum networks with multi-degree Reconfigurable Optical Add-Drop Multiplexer (ROADM) multi-shelf nodes using the Cisco Transport Planner (CTP) software. You’ll learn how to: - Install the Cisco NCS 2000 series hardware - Configure an optical network and circuits using the Cisco Transport Controller (CTC) software - Learn which components and configurations take advantage of and/or are required for the Flex Spectrum 96-channel feature - Configure optical networks with multidegree ROADM multishelf nodes - Configure optical networks with colorless, contentionless, omnidirectional, and MPO cross-connect advanced features - Describe and configure the NCS 2000 400-Gbps Xponder line card Updated November 2026 Virtual Learning This interactive training can be taken from any location, your office or home and is delivered by a trainer. This training does not have any delegates in the class with the instructor, since all delegates are virtually connected. Virtual delegates do not travel to this course, Global Knowledge will send you all the information needed before the start of the course and you can test the logins.

GK #OPT201Company EventVirtual Learning
Duration3 daysFormatsCompany Event · Virtual LearningTopicsRouting And Switching

What you’ll learn

Target Audience

This course is designed for technical professionals who need to know how to deploy a Cisco NCS 2000 Series Dense Wavelength-Division Multiplexing (DWDM) network with Flex Spectrum.

The primary audience for this course includes:

- Designers

- Systems engineers and implementation staff

- Network operations center personnel

- Technical support personnel who are involved with the deployment, operations, and maintenance of the Cisco NCS 2000 Series

- Channel partners and resellers

Course Objectives

After taking this course, you should be able to:

  • Describe the hardware and components required and used with the Flex Spectrum feature
  • Design optical networks in the Cisco Transport Planner software
  • Install the hardware, including multishelf nodes
  • Perform node turn-up and create circuits using the Cisco Transport Controller software
  • Configure optical networks with multidegree ROADM multishelf nodes
  • Configure optical networks with colorless, contentionless, omnidirectional, and MPO cross-connect advanced features
  • Describe and configure the NCS 2000 400-Gbps Xponder line card
  • Add a node to an existing DWDM ring
  • Describe the NCS 2000 Troubleshooting Guide
  • Use the features and documentation with Transport Controller to perform maintenance, testing, and basic troubleshooting 

Course Content

Course Outline

  • DWDM and Flex Spectrum Foundation
  • NCS 2000 Chassis and Cards
  • Design ROADM Networks with CTP
  • Hardware Installation and Multishelf
  • Node Turn-Up and Circuit Creation
  • Advanced Feature Networks and Circuits
  • Testing, Maintenance, and Basic Troubleshooting
  • Spectrum Switched Optical Network



 Lab Outline

  • Cisco Transport Controller
  • Cisco Transport Planner
  • Adding a Node to Existing DWDM Ring Network
  • Optical Channel Network Connection (OCHNC) Circuits
  • Optical Channel Client Connection (OCHCC) Circuits
  • Colorless Ports and Circuits
  • Contentionless Circuits
  • Connection Verification
  • Performing the Optical Time Domain Reflectometer (OTDR) Test
  • Maintenance and Performance Monitoring
  • MSTP Troubleshooting
  • Configuring the 400XP card

Course Prerequisites

Before taking this training, it is recommended to take the Cisco Optical Technology Foundations (OPTFND) training first. However, if you have some knowledge of optical fiber networking, single and multimode fibers, and small form-factor pluggables (SFPs), you should already have the necessary skills to complete this training.

Test Certification

  • None

Upcoming training

Dates and availability are confirmed by Bolt when we follow up. All times are shown in the provider’s stated time zone.

2027-06-01 — 2027-06-038:30 AM to 4:30 PM
Virtual LearningVirtual (Eastern Standard Time) · English
2027-10-12 — 2027-10-148:30 AM to 4:30 PM
Virtual LearningVirtual (Eastern Standard Time) · English